Separate names with a comma.
Heads are disassembled and parts are organized in my fancy organizer, next on to spending I'm sure what will be a few hours to get them cleaned....
Now that I have the heads off , it was time to get the valves out and organized, well let me tell you ,I tried using the valve spring compressor (...
That's a pretty good match.
25 or so years ago we use to have a Zollner piston Manufacturer where I lived. The Z should have rang a bell.
Thanks
Hi guys, do these numbers on the top of the piston mean anything, or are they just a part number from IH ? Sorry, this is a 1978 345 engine from...
This engine did run before I took it out of the Scout and the only concern I had was the # 8 cylinder as it had the lowest compression so I was...
Big step today, finally decided to start the tear down on the motor, so here's the plan, the block- inspect and measure what it can, probably...
Boy, was that ever a discussion in our house,, but the final say came down to my wife, as this build is actually for her,,, she wanted to stay...
Thanks. I only went with the 2" lift, so the front lines were good . It was an easy fix and you really wont see it after the body is back on.
A bit more work don't today, got my brake lines in , I had relocate the little bracket at the back off the frame for the rear brake hose, wait I...
Thanks for the reassurance, I was just a bit worried as this is new to me , I did also put a call into Skyjacker to see if I could get info from...
Truck is still in process, body and motor/tranny are not in the frame yet.
That looks cool like old school transport trucks. Is it easy to use??
The only things that are tight are the u -bolts to the axles and shock bolts, I have not tightened the bolts down yet on the shackles to the...
:yes::yes: Funny,, I was just trying to look back at this exact build when I noticed your message.. JJ did comment on my issue and said they all...
I really don't have anything I can use, as the body is on a dolly and the motor is on a stand. What I did do was use a ratchet strap around the...
HOLY Cow, how the heck did I miss this build of yours,, I feel bad for not seeing it earlier. Another member had directed me here as that I am...
So this may actually be correct for this set up, it's only a 2" lift. ?
I will check his build out too
