Ford Wiper Delay in SII

[rbelflower]

RD,

Here is the wiring layed out.
Let me know if you want a pic. I have a unit that I have not installed 100% yet.

[RD Durham]

Thanks! Looks like I had the Park and Fast/Delay wire wrong.

-----------------------------

Rewired and it works. First position on the switch on the left is Delay, then OFF, High and finally Low.

Here's how it's wired:

Scout wires Ford wires
#82 Black/Green
#87 Black/White
#82A Red
#82B White
#82C Blue/Orange & Black/Pink

[scoutboy74]

Thanks rbelflower. You cleaned up a mess I regret having left behind. RD, I'm glad you got it to work. Mine is still working in the same manner all these years later. Today was a perfect "delay wiper day" out in the woods of SW Orygun, and I just smile every time those wiper blades cycle and rest in their delayed fashion.

[RD Durham]

Thanks Scoutboy74 and rbelflower, I appreciate the help.

I found this on another site about switching the High and Low positions on the Ford delay wiper switch. I have no idea if it works or not. The reference to "switch" is to the Ford delay wiper switch.

=====================
If you want to make the sw work "normally" it can be done with a common 5 pin relay.

Connect SII #82c to relay #87a, relay #30 and SII #82b to Ford #58, Ford #56 to relay #86, and relay #85 to ground