'63 C1200-Where do I get a carb rebuild kit?

[jefftucker85]

I've got a '63 C1200 BG241, 4sd, 4x4. Was my daily driver til last week, now the carb is overloading and flooding the engine out. Anyways, anyone know where I can find a rebuild kit for it? Holley 1bbl, stamped 6R-894B. Even the Holley catalog only goes back to '68. Thanks for any feedback. Pickup is for sale if anyone's interested. Located in Western NE.

[Doc Stewart]

Try carburettorfactory.com

Check your float level first. If the float fails, you will get those symptoms.

[jefftucker85]

Thank you sir.

[Thomas]

---Sorry, my abilities are limited on mobile so I can't get any further crossing known numbers. Here's what I gathered before the brick wall for your Holley 1904, List# 1238-1(?). Make sure you examine packaging prior to breaking the seal. It has been said that the Wells is the only kit to have the needle & seat, but I'd look into the SMP 252c as well.

---You can also check Old IHC for kits & known P/N's, as well as contact Binder Books for any possible recorded P/Ns.

---Looks like it's become an expensive kit. Even RockAuto's choices in the SMP line (252c) run close to $50. If they're truly that expensive now days & you find it in SMP (and find the SMP kit contains all the necessary parts), if it were me, I'd check rockauto once weekly and nab a few when they go on close-out/sale.

-Wells ck368
-NAPA crb25577
-Tomco 5058

[bruno]

Here I did find my rebuild kit for the fuel pump of my BD-308

http://www.maritimedragracing.com/th...automotive.htm

[jefftucker85]

Thanks guys, appreciate it

[Dan&Becky'sScout80]

AutoZone has rebuild kits for the holley 1904, There are two different versions, depending on your list# (I think the difference is in the length of the accellerator pump, could be wrong on this). I got one of them for around 18 bucks last summer, and it worked great, had everything I needed. Check out Michael Mayben's holley single barrel carb info on IHonly North forum. He is the man on this thing.