Binder Planet
BinderPlanet

Go Back   Binder Planet Forums > General Forums > General IH Tech


IH Sierra Fall Rallye


Reply
 
Thread Tools Display Modes
  #1  
Old 06-01-2011, 03:47 PM
Greyguild's Avatar
Greyguild Greyguild is offline
Farmall Cub
 
Join Date: Sep 2009
Location: Thetford Mines, QC
Posts: 263
Default Scout II Dimensions Drawing (Work in progress)

Hi all, following all the questions I'v been askikng about dimensions for my Scout II hull and with the help of a drawing made by "Thomas" from this board (Took the liberty of scaling it to match the existing drawing) I made a compilation of all the infos I had and added them to a drawing that already existed trying to make a more complete schematic...

Please keep in mind that it is still a work in progress and that I might be wrong on some dimensions (Give or take 1/8"), if yes please correct me and I will update the schematic accordingly...

So here it is :


Like I said, a work in progress...

Thank you to all of you that helped me so far...
__________________
75 Scout II, 304 V8 automatic and a whole lot of rotten parts ...........RIP

My Build... Until it died

Only for an International

Nothing was fixable (Now I know)
Reply With Quote
  #2  
Old 06-01-2011, 04:26 PM
Mike Moore's Avatar
Mike Moore Mike Moore is offline
Dreams of Cub Cadets
 
Join Date: Nov 2001
Location: Bridgewater, VA
Posts: 4,914
Default Re: Scout II Dimensions Drawing (Work in progress)

GREAT info! I've got a few dimensions from doing stripes and all, but nothing drawn up all cool-ified like this. Good stuff!
__________________
Mike Moore
www.ScoutcoProducts.com
______________
1980 Scout II-Chevy LT1, 700r4, NP241, 3.73's, RS, 4" lift, 31's. Daily driver

__________________
Scout LT1 swap: $3055
Leaving a riced out Honda with a fartpipe sitting at the stoplight: Priceless!
Reply With Quote
  #3  
Old 06-01-2011, 04:45 PM
kf7lcw's Avatar
kf7lcw kf7lcw is offline
Farmall Cub
 
Join Date: Jan 2011
Location: Sweet Home, OR
Posts: 20
Default Re: Scout II Dimensions Drawing (Work in progress)

Great job and a great resource!
__________________
Keep the wheels spinnin and the girls grinnin

1985 IH-250 6.9 Diesel 4x4 **Sold 2/12: Now belongs to scoutboy66**
Startup Video: http://youtu.be/8e7e2wErBCg
Reply With Quote
  #4  
Old 06-01-2011, 05:15 PM
Thomas's Avatar
Thomas Thomas is offline
Dreams of Cub Cadets
 
Join Date: Jan 2002
Location: Friendship, WI
Posts: 4,669
Default Re: Scout II Dimensions Drawing (Work in progress)

---Looks good for your truck. Don't take this as criticism, but I noticed a lot of the dimensions, mainly clearance/height/etc., don't match factory drawings and honestly, a collection of owners' measurements is not good enough to build from, so I wouldn't suggest using this as a guide for anything other than your setup for that one particular truck.

---The "1/8" tolerance" is an awful lot when it comes to design and if I'm correct, I watched, on the board, the birthing of that "quote"s misuse (just after VBulletin days), after someone who understood "allowable tolerance" and mentioned "tolerance" when it was in regards to bending/shaping metal, someone picked up on it (thinking it's "allowable" all the time), and for the following months it was thrown around like it is default in drawings when that's not so, after the drawing has left the original draftsman's table. It ends up being a grapevine of incorrect measurements after that point... if everyone adds their "allowable tolerance".

---I'd have to sit down for at least an hour with diagrams to verify those measurements. The originals are probably eight times the size of what is available. What is available doesn't even have a key, telling scale, so it might not even be "scale" problem is, the dimensions got all jam-packoozled and it's hard to read, but just glancing, without comparison, I'd say it looks great for your personal records. I have yet to look at my first hand-drawn sketches from when I stopped lurking on the board and asked... "Does anyone have the tub dimensions" and Tom Mandera politely told me he'd never seen any... lol. I repaired the sheetmetal without reference and then drew the Scout II's side elevation/view so I could put together a paint scheme. I have yet to go over that alf-hassed sketch and compare measurements to factory drawings. I just don't like going through that folder. It's in with too many clean copies of the side view (though that was with TravelTop off) I used to make the drawing I offered in the last floorboard post, done up on too-high quality paper, so it (and they) stay locked up.. LOL.
__________________


Who loves hearing,
"We replaced this & that & the bill comes to $x,xxx.xx ... but we couldn't find the problem. What payment method will you be using?"?
Reply With Quote
  #5  
Old 06-01-2011, 06:44 PM
Greyguild's Avatar
Greyguild Greyguild is offline
Farmall Cub
 
Join Date: Sep 2009
Location: Thetford Mines, QC
Posts: 263
Default Re: Scout II Dimensions Drawing (Work in progress)

....
Just wanted to contribute... Sorry if it aint "Up to par"...
__________________
75 Scout II, 304 V8 automatic and a whole lot of rotten parts ...........RIP

My Build... Until it died

Only for an International

Nothing was fixable (Now I know)

Last edited by Greyguild; 06-02-2011 at 06:10 AM.
Reply With Quote
  #6  
Old 06-02-2011, 09:20 AM
JeffR's Avatar
JeffR JeffR is offline
Administrator..Bigscout79
 
Join Date: Apr 2003
Location: Chicago, IL
Posts: 1,769
Send a message via MSN to JeffR Send a message via Yahoo to JeffR Send a message via Skype™ to JeffR
Default Re: Scout II Dimensions Drawing (Work in progress)

No apologies necessary - thanks for the contribution.
__________________
-Jeff
1980 Scout II, 304
Visit the wiki knowledge base page
Reply With Quote
  #7  
Old 06-02-2011, 10:47 AM
mrendos's Avatar
mrendos mrendos is offline
Farmall Cub
 
Join Date: Jan 2009
Location: monessen;pa
Posts: 250
Default Re: Scout II Dimensions Drawing (Work in progress)

does anyone know the dimensions on the top off windshield frame to rear seam on quarter panel ,where the end cap mounts up.
Reply With Quote
  #8  
Old 06-02-2011, 11:01 AM
John Glancy's Avatar
John Glancy John Glancy is offline
Farmall Cub
 
Join Date: Oct 2001
Location: Springfield, oIHo
Posts: 289
Default Re: Scout II Dimensions Drawing (Work in progress)

The factory Dimension Drawings are available in these body building books from SSS





IH Service 1969 Body Builder Book, Scout 800, Light Duty





IH Service 1977 Body Builder Book, Scout II, Medium & Heavy Duty





IH Service 1980 Body Builder Book, Scout II, Medium & Heavy Duty
Reply With Quote
  #9  
Old 06-02-2011, 11:42 AM
Greyguild's Avatar
Greyguild Greyguild is offline
Farmall Cub
 
Join Date: Sep 2009
Location: Thetford Mines, QC
Posts: 263
Default Re: Scout II Dimensions Drawing (Work in progress)

AAARRRRRGGGGGG!!!!!!!!!!!!

If only I knew this last summer!!!!!!!!!!!!!!!!

Just bought the 77 Body Builder Book.... Money well spent I think

Thanks a lot John... How come I never heard of those before???

I've seen a lot of questions on this but noone mentioned it.... I can understand copyright stuff, like I won't be scanning pages, but will it stop me anwsering questions on dimensions if asked?...
__________________
75 Scout II, 304 V8 automatic and a whole lot of rotten parts ...........RIP

My Build... Until it died

Only for an International

Nothing was fixable (Now I know)
Reply With Quote
  #10  
Old 06-02-2011, 01:34 PM
John Glancy's Avatar
John Glancy John Glancy is offline
Farmall Cub
 
Join Date: Oct 2001
Location: Springfield, oIHo
Posts: 289
Default Re: Scout II Dimensions Drawing (Work in progress)

Quote:
Originally Posted by Greyguild View Post
AAARRRRRGGGGGG!!!!!!!!!!!!

If only I knew this last summer!!!!!!!!!!!!!!!!

Just bought the 77 Body Builder Book.... Money well spent I think

Thanks a lot John... How come I never heard of those before???

I've seen a lot of questions on this but noone mentioned it.... I can understand copyright stuff, like I won't be scanning pages, but will it stop me anwsering questions on dimensions if asked?...
This is a pretty recent product, we just got them done a few months ago. Thanks for the business! Feel free answer questions if asked, there is no harm in that.
Reply With Quote
Reply

Tags
1977 , 1980 , 800 , body , build , cap , clean , electrical , frame , height , hose , info , mounts , paint , panel , rear , scout , scout 80 , scout 800 , scout ii , top , truck , tub , windshield

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Online store Updated with More Products Jeff Ismail IH Parts America 1 11-25-2009 09:39 AM
Drawing of Scout 80 frame dimensions? Flingarrows The Skunkwerks 3 10-22-2006 05:57 AM



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

The IH logo, the "IHC" logo, are trademarks respectfully of the International Truck & Engine Corporation and the Case New Holland Corporation.
They are used for identification purposes only.

BinderPlanet® Copyright ©2011