anyother replacements for1000D upper ball joint

[FiredUp]

I need a upper ball joint in Canada that will fit my1970 1000D if your in USA and have one for cheap Please reply

[jhadfiel]

2 wheel drive or 4 wheel drive??

[FiredUp]

this truck is two wheel drive

[jhadfiel]

Originally posted by FiredUp
this truck is two wheel drive

I'll take a look today and let you know a part number.

[jhadfiel]

The upper ball joint for the 1970 1000 is not listed in any of the books that NAPA has. The closest I could get was 1971 and that showed NAPA part number 260-1048.

Hope this helps a bit... otherwise, call Ken Young at Old IHC Parts in Houston.

[FiredUp]

Thanks Jim for your reply I will call Napa tommorrow but I don't think they have it cause I am in Canada and parts are more obsolete here it still has some life and I hope it makes it till Spring cause it suddenly got mighty cold here

[jhadfiel]

Originally posted by FiredUp
...I don't think they have it cause I am in Canada ...

Whether you are in Canada or not, they can still order it for you. There are many distribution centers here in the US where they should be able to get it. I did not check with any of them to find out where they could find it though.

[jhadfiel]

Originally posted by FiredUp
...upper ball joint...

I was perusing an old Moog catalog late last night. They showed the 61-75 as having FA-8 and FA-9 Axles. This used a different part number than the FA-5 axle that I had originally given you the part number for. Moogs number for this is K3084. Better check to see which axle you have...

[MikeInMobile,AL]

Just for anyone else looking for info on the '61 - '73 FA8/FA9 front axle, 100/1000/1010 series 1/2 ton IFS torsion bar trucks, steering and front suspension parts, and finding this old thread, here is a link to FA8/FA9 parts sources,
http://www.binderplanet.com/forums/s...ad.php?t=46939

Here is a link to FA8/FA9 part numbers,
http://www.binderplanet.com/forums/s...ad.php?t=57229

Mike