New design for rear 4 link

[Scott Sinner]

Well, here is my closest design so far for a 4-link coil set up on my 800. This design has 3" lift plus 1-1/2" for 34" tires for 4-1/2" over stock with 31's.

I am not interested in max lift, or the most extreme crawler. I wanted to keep the lower mounts off the bottom of the frame and these are positioned to be right at the start of the radius for the frame rise.

The lower links are about 30", and this design puts the antisquat about 60% of the center of gravity. I shouldn't need any new cross members, but I will fabricate the link mounts on a sub frame to reinforce the frame.

Let me know what you think...