Working on My 1951 U-95 Fridge - Need some help

Discussion in 'Irma's Place' started by gillis51, Sep 5, 2018.


  1. gillis51

    gillis51 Binder Driver

    Joined:
    Feb 3, 2010
    Messages:
    641
    Likes Received:
    106
    Trophy Points:
    43
    Location:
    Easton, MA
    I just pulled my U-95 Fridge out of storage and want to get it running again. When I moved it to storage a few years back i removed the door to lighten the load a little so i could lift it onto my truck without help. In doing so i dropped the hinge backing plate inside the fridge frame. Ive tried fishing it out with thin wire but haven't been successful.

    Does anyone have a manual on how these things come apart? I would like to remove the plastic trim around the fridge frame so i can get to the hinge plate.

    Also, some of the porcelain chipped. Anyone have a suggestion for repairing it?
     
  2. breadman bill

    breadman bill Binder Driver

    Joined:
    Jul 1, 2018
    Messages:
    856
    Likes Received:
    1,509
    Trophy Points:
    93
    Location:
    Julian Ca.
    They sell porcelain repair paint in a little bottle like white-out,I've used it on sinks in the past. It's not great but if you put on 2 or 3 thin coats it's not bad. They have it on e bay for $16.00
     
    gillis51 likes this.

Share This Page