Scout II Quarter panel measurement?

Discussion in 'General IH Tech' started by Gioscout2, Mar 23, 2020 at 3:31 PM.


  1. Gioscout2

    Gioscout2 Farmall Cub

    Joined:
    Dec 10, 2019
    Messages:
    56
    Likes Received:
    17
    Trophy Points:
    8
    Location:
    Essex
    Hi all,
    can I ask a favor for someone to provide some measurements on this I need to fab some patch panels for my scout and have no reference points to go with, please and thanks.. :cornfused:

    qtr panel.JPG
     
  2. Phil

    Phil Farmall Cub

    Joined:
    Mar 17, 2004
    Messages:
    86
    Likes Received:
    3
    Trophy Points:
    8
    Location:
    El Paso
    Geoscout2-measurements: top of fender to bottom-mine is 33 1/4"; bottom of fender is 7 5/8" wide; bottom of fender up to shaded area in your picture is 8"; and across that same shaded area in your picture is 9". My Scout II is a 1975 XLC model and has the chrome strips on each side.
    Hope this is of some help for you-keep up the great fab work. You're to be congratulated!
    Good luck-farwestx
     
    vince konicki likes this.
  3. Gioscout2

    Gioscout2 Farmall Cub

    Joined:
    Dec 10, 2019
    Messages:
    56
    Likes Received:
    17
    Trophy Points:
    8
    Location:
    Essex
    Thanks for the measurements at least this gives me an idea of whether the PO work needs to be touched up or totally redone. Thanks again for the compliment, this project is definitely testing my skills .
     
  4. Phil

    Phil Farmall Cub

    Joined:
    Mar 17, 2004
    Messages:
    86
    Likes Received:
    3
    Trophy Points:
    8
    Location:
    El Paso
    You're quite welcome-and your skills are right up there! More fun to be had . . .
     

Share This Page