New to Forum, SSII 33,000 original miles

Discussion in 'SSII' started by mmacarthur, Nov 13, 2017.


  1. winchested

    winchested High Wheeler

    Joined:
    Oct 12, 2016
    Messages:
    1,320
    Likes Received:
    266
    Trophy Points:
    83
    Location:
    Delhi, ON, Canada
    Ron those are awesome, my door skins have the clear vinyl at the bottom, that might be an option for me, as I have two sets of door frames.
     
  2. Ron A

    Ron A Binder Driver

    Joined:
    Jan 11, 2003
    Messages:
    842
    Likes Received:
    67
    Trophy Points:
    28
    Location:
    State of Jefferson
    All I did was modify an old spare set of OEM frames and had a local upholster skin them. I run them a lot and it keeps the miles off the full top and doors. As expensive as they are anymore, they need to last a while. Glad I do have a full top and doors though. Fortunately old kayline and STC hardware works with the new Rhinyl top and door skins.
     
  3. mmacarthur

    mmacarthur Farmall Cub

    Joined:
    Aug 22, 2017
    Messages:
    17
    Likes Received:
    5
    Trophy Points:
    3
    This thing is awesome. I picked up a used soft top recently, so I have the hardware on. The top is soon to be at the upholsterers getting a new zipper and some new Velcro.
    The cage bolts into the factory body mounts and the factory wheel well holes. There is a layer of rubber in between the cage on the body.
    I may be selling this thing to fund a paramotor and glider purchase. Let me know if you're interested.

    20180210_164417.jpg 20180210_164937.jpg 20180210_171222.jpg .
     
    IdahoRyan likes this.
  4. mmacarthur

    mmacarthur Farmall Cub

    Joined:
    Aug 22, 2017
    Messages:
    17
    Likes Received:
    5
    Trophy Points:
    3
  5. mmacarthur

    mmacarthur Farmall Cub

    Joined:
    Aug 22, 2017
    Messages:
    17
    Likes Received:
    5
    Trophy Points:
    3
    P.S. Does anyone know how the footwell lights are grounded? The wiring diagram shows that the ground wire runs to the bulkhead connector, but I can't decode the FSM diagram for the connector. So I don't know what pin the wire runs to. I just want the footwell lights to be on when I have the headlights on.
     
    IdahoRyan likes this.
  6. JC Lewis

    JC Lewis Farmall Cub

    Joined:
    Mar 30, 2018
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Is it just me or is this the
     

Share This Page