My new ride!

Discussion in 'The Truck Stop' started by sarookha, Nov 12, 2017.


  1. Jeff Jamison

    Jeff Jamison Lives in an IH Dealership

    Joined:
    Oct 11, 2001
    Messages:
    6,227
    Likes Received:
    325
    Trophy Points:
    83
    Location:
    Aliquippa Pa
    Call scoutco,they have them or will make for you.Always call the lightline dealers.Not everything is on there sites,and if they don't have it,most times they can tell you where to get it at.
     
  2. sarookha

    sarookha Farmall Cub

    Joined:
    Dec 18, 2014
    Messages:
    350
    Likes Received:
    11
    Trophy Points:
    18
    Location:
    Alba, Texas
    Thanks! I'll do that.
     
  3. Big Ed

    Big Ed High Wheeler

    Joined:
    Sep 29, 2010
    Messages:
    1,978
    Likes Received:
    193
    Trophy Points:
    63
    Location:
    Fresno,Ca
    Fixed it for you.

    You have to have the transmission in a gear to get the power to the transfer case. If you set the winch up right you will have multi speeds to pull in, and one speed to wind out. I just use reverse to unload the cable, then I can release the drum and pull cable out.

    Is the PTO a Braden? Mine is.
     
  4. sarookha

    sarookha Farmall Cub

    Joined:
    Dec 18, 2014
    Messages:
    350
    Likes Received:
    11
    Trophy Points:
    18
    Location:
    Alba, Texas
    Ed, if I wire-brush the crud off the PTO, it will say "Braden" or "Chelsea" or some-such? I've got a big winch in my stash, but was planning to put that on the R-132. It's a Braden AMGU5-12 , 20k lbs, with reversible extension shaft capstan. I think it's too huge for the 1100A, would look out of place on a 1/2 ton.
     
  5. Big Ed

    Big Ed High Wheeler

    Joined:
    Sep 29, 2010
    Messages:
    1,978
    Likes Received:
    193
    Trophy Points:
    63
    Location:
    Fresno,Ca
    Yes. My Chelsea’s have a riveted on tag, the Braden just has raised letters in the casting. I’ll try to get better pictures today, couldn’t find any. This one is from my rear winch install. I have a skid plate under there now, might not be able to do anything.
    BF737F5F-F04A-4B9C-B96E-445CBC3CD8B9.jpeg
     
  6. Big Ed

    Big Ed High Wheeler

    Joined:
    Sep 29, 2010
    Messages:
    1,978
    Likes Received:
    193
    Trophy Points:
    63
    Location:
    Fresno,Ca
    I know someone with a big winch like that on a 1200D.
     

Share This Page