Holley/Duraspark Distributor conversion Part Due(2)

Discussion in 'Injection Tech' started by Bill USN-1, Jul 21, 2006.


  1. Dennis Bernth

    Dennis Bernth Moderator Staff Member Moderator

    Joined:
    Oct 11, 2001
    Messages:
    5,967
    Likes Received:
    35
    Trophy Points:
    48
    Location:
    Mill Creek, IN.
    I've only used the four pin modules, and I just use standard female spade connectors. No problems yet!
     
  2. T.Marchette

    T.Marchette Farmall Cub

    Joined:
    Feb 4, 2016
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Athens, GA
    I'm trying to make this work on my gold box '75 Travelall 392 and I've tried multiple attempts at getting this to work but I've been reading this and many other threads trying to make sure I have the right parts; I'm using the Mopar pickup, GM 4-pin, coil (1. original, 2. MSD blaster III, 3. epoxy coil off '91 camaro)* *denotes multiple options tried, and I'm still not getting a spark. I'm thinking the problem could be the magnetic pickup, but what Ohm rating should the coil be? My grounds are good and I've tested the coils and 4 pin and they're good to go, not sure how to test the pickup. thanks

    My father and I have 13 Internationals of all flavors and cannot afford to do the DUI drop-in for each of them, so this would be awesome if this could work for all of them!!!
     
  3. Bill USN-1

    Bill USN-1 Moderator Staff Member Moderator

    Joined:
    Dec 25, 2002
    Messages:
    16,702
    Likes Received:
    126
    Trophy Points:
    63
    Location:
    Whidbey Island, WA

Share This Page