BCB 4x4 Rear disk brake kits in stock

Discussion in 'Back Country Binders 4x4' started by John Fleck, Jan 6, 2009.


  1. John Fleck

    John Fleck Farmall Cub

    Joined:
    Oct 15, 2001
    Messages:
    348
    Likes Received:
    3
    Trophy Points:
    18
    Location:
    Bremerton Washington
    Hi everyone,

    Just a note that we currentley have 9 scout 2 rear disk brake kits in stock
    A kit consists of everything but the Chevy caliper. The kits are $250. If you need calipers I have thoes as well just ask. Your choices are the 79-85 Cadallic Eldorado calipers with the e-brake capability, or the Gm F-Body front calipers with no e-brake capability. (Chevy Monty Carlo, Cutlass, Oldsmobile Delta 88, etc) Please call us at 360-377-4979 to order yours today!

    2) Rotors
    2) Weld on brackets
    2) Stainless steel jumper lines
    2) Mounting tabs for stainless steel jumper lines.
    2) Horse shoe clips for the brakeline to tab connection (not shown)
    2) Banjo bolts for Chevy calipers
    4) Copper washers for banjo bolts
     

    Attached Files:

    Last edited: Apr 30, 2009
  2. John Fleck

    John Fleck Farmall Cub

    Joined:
    Oct 15, 2001
    Messages:
    348
    Likes Received:
    3
    Trophy Points:
    18
    Location:
    Bremerton Washington
    Here are several nice photos of the kit installed. All directions come with the kit, and you may call upon us for further help if you need it. We are more than happy to walk our customers through the install on the phone.

    NOTE: In the first two photos you notice we used non remachined rotors. These were preproduction shots while developing the kit. We now use a remachined rotor in order to maintain the low cost of our kit to you our valued customer. The last pic shows the tab for the break line not installed. You can see the union of the hard line to stainless steel jumper line where we will install the tab and use the clip to hold it in place.
     

    Attached Files:

    Last edited: Feb 18, 2009
  3. John Fleck

    John Fleck Farmall Cub

    Joined:
    Oct 15, 2001
    Messages:
    348
    Likes Received:
    3
    Trophy Points:
    18
    Location:
    Bremerton Washington
    Im getting some great e-mails from people who have used this kit and say if they new it was this easy they would have bought it sooner. Some additional questions about prices on items that people ordering the kit wanted are below.

    I offer the Caddy calipers that have the e-brake capabilities complete with hardwear for $290 a set(core included).
    The non e-brake calipers are $130 (core included)

    A complete kit with the e-brake calipers would be $540
    A complete kit with the non e-brake calipers would be $380

    The Disk Brake / Disk Brake master cyclinder is $30
    The Disk/Disk combination valve is $99.95
    The manual adjust proportioning valve (for rear) if omiting the above combination valve is $44.95
    The same valve with a guage kit is $84.95
     
  4. John Fleck

    John Fleck Farmall Cub

    Joined:
    Oct 15, 2001
    Messages:
    348
    Likes Received:
    3
    Trophy Points:
    18
    Location:
    Bremerton Washington
    US Mail Flat Rate shipping anywhere in the US $17.95 :D
     

Share This Page