Separate names with a comma.
Really nice post and work too. Nice progress, sir.
Regarding Recline - on our Scout II with original seats - I put large thick steel washers under the front seat base between base and floor on both...
Those look GREAT. I think I need some for my son's 79... wish they had 80/800 rubber.... i asked today and no dice..... - then upon checking...
are there ever going to be pictures????? Would love to see what $289 gets us
My build thread with images is on binderbench. Jules 71 scout 800A in the 80/800 section. Last build thread for the 80 was on here. I plan to add...
Addicting is right. My son "got me hooked", after we found the first one, a 79' in Pennsylvania with 94,000 miles - and after our driver quality...
Hi Jack, Very Nice Rig and Work. What RED paint did you use for the inside dash? I think the color looks great. My 800a has been painted with...
My brakes on my 800 dana 44 rear axle are 10inches, and the spring hardware link is the same i sent earlier.
Below - is where I got my spring kit - I ordered the brake shoes from Napa Isa Ismail Isa's International Harvester, LLC Scout //...
awesome, tracy!! awesome. what size are those tires? They look great.
awesome - i am hooked on it too....so it caught my attention... very healthy!
1000 lbs of almond butter?? what will you do with that? The gauges look awesome.
Tonight I went out and looked at the Reservoir I have, and it is stamped Front Brakes into the Cast Iron reservoir on mine. ( after much wire...
for my 800, the front (meaning front of the truck, furthest from the piston) is going to the front wheels. For our S2, the front well, goes to...
http://www.auto-repair-help.com/automotive_maintenance/master_cylinder.php I've seen both ways - but read the attached and look at the images in...
I only used my go to - Kerosene - for soaking, though people swear by those special dips. The power valve in the rebuild kit is what I used...
I had a similar issue, check and clean the discharge nozzle, and blow carb cleaner through all the holes when its out, through the venturi and on...
Roll Test date 4/8 signed by elliot
Here's my new acquisition - 800A have LST - G407751 final inspection date 4-9-70 came from wilkes barre pa - was delivered to Linden NJ on LST.
Thank you. The part at the bottom of the picture, seems to prevent the throttle to slow down, unless we push it to the left by hand pressure....
