Separate names with a comma.
Yes, sorry Guys. I almost lost my Dad in 2019 I have had to deal with a lot of Family stuff. Build slowed way down unfortunately because of these...
I really couldn't tell you. I would think not, because powered coating uses electrolysis. I would think one could only coat materials that were...
Well guys, a small update, nothing major. 53cj3a is local to Las Vegas area like myself and he came over and brought his Tail Light and Front...
Sorry guys! No real good updates yet. Hopefully soon. I have been working on it, but progress has been slower then expected. I am in the middle of...
Sorry for the late reply, life got in the way. Yes, I believe I used a Pully Puller to rip the whole unit off. Of course my engine was out of the...
I don't think it matters on way or another. For me it was just a matter of how it all looked for my build. Sent from my SM-T820 using Tapatalk
Second that, replaced ALL of mine hardware with Allen Heads. High grade stainless, no worries in the distant future off getting things apart. I...
Nothing is wrong, it is just that the oil journals are not lined up at TDC Compression stroke #8. So to do a good preoil you need to have some on...
Coop, The Beast is looking Awesome. Man that's a lot of work. I don't envy you, that really is eatting an Elephant one bite at a time. Keep it up!...
Man, every time I look at you build it just amazes me. I can't wait to see the finished Scout. You build is an inspiration to me to kick it up a...
Ok, so here is the thing about lining up the Dizzy. Get TDC on Compression which you have done. Now look into the Dizzy hole and you will see the...
What he said, the things to consider when stabbing your Dizzy are exactly what Mr. Strong mentioned. Sent from my SM-T820 using Tapatalk
Ok, so I bench tested both of the motors with a good 12v source. Both motors worked perfect. BUT, I noticed that I could produce what sounds like...
Please don't get yourself in a jam based on what I posted. It has been a few years since I tore mine down, so I'm not sure. It just seems that...
BTW, I forgot to mention, both of those reading were while the motor were in the "park" position. Sent from my SM-N950U using Tapatalk
I have 2 different ScoutII Motors (both are the same) and my OHMs reading are the same as yours, I found some links that might help:...
Just saw your issue posted, I try to post some resistance checks on a motor within the hour. Sent from my SM-N950U using Tapatalk
Hum, So are the "C"'s already in the open position? It has been awhile since I had mine together, but I believe that closing the gate itself puts...
I just got done building the brake sysyem and thought I would post a pic. I hand bent the lines, powdered them black then put stainless protection...
