Separate names with a comma.
When I lived in Mass there were areas they did not salt because of the potential runoff into ponds. Here in IN salt is used a lot on my road but...
If you don’t want new rust or existing rust spreading fast, don’t drive on it unless you are willing to wash it very regularly. My corn binders...
George, What is the part # on that 152 gasket? Here is the commonly available 152 gasket. #MS9800 [IMG] Sent from my iPad using Tapatalk
The two are definitely different. Search here to see if you can find out if you need to use a specific one on your engine and what gasket is...
From memory, there was a change fairly early to the 152 intake. You must have one early and one more common intake. They also require two...
Any grain will work. The smell is a bonus! Sent from my iPad using Tapatalk
It should be level with the hole while sitting level. If the pumpkin has a grain plug its easy to change the fluid. Since you don’t know when it...
You’ve at least ruled out the bearings. It could take some time to narrow it down. Starting with safety related items is always a good idea. The...
Ok, no torque wrench necessary. Here is what I found that should cover your application. [IMG] Sent from my iPad using Tapatalk
What year is your truck? Sent from my iPad using Tapatalk
No wrap on it when I got it. Yes there is a serial # and a paper tag with the same number. It’s a complete engine minus the carb. Here is the...
That drag probably indicates your drum needs to be turned. With use, the shoes would have worn down on their own and not likely to cause the kind...
I have a 79 304 that i purchased from a former engine plant employee. Still strapped to the factory pallet. He said that after the switch to...
Not bad. I planned on deleting the dust shield on the rear yoke anyway. It just traps water. It was the only one on mine that was rusted. Sent...
Looks great. Much better than an old drum type. I’ll be interested in hearing about the issues you found. Sent from my iPad using Tapatalk
If you want to add a TC brake look at this kit. https://www.tsmmfg.net/np205-transfer-case-parking-brake.html Sent from my iPad using Tapatalk
No idea of the maker. I looked at one I have and the mark appears to be LN or LU in a circle. I reworked one of the super capacity to put my TA...
I wouldn’t waste time rebuilding that motor. It looks like you’ve already found a replacement at a decent price. Sent from my iPad using Tapatalk
Yeah that’s a common problem without an easy fix. Dig through the info and pick one that works for you. Sounds like it sits outside so you should...
This is probably a very good option. They make waterproof/breathable fabric and from my experience it is very abrasion resistant. Sent from my...
