Separate names with a comma.
Not that I am interested in your left.. mmm.. thumb, but I know where there might be a set avalible soon. I'll PM you after I find out if the guy...
Sent you a PM
There is going to be a trail run on Sunday july 15th during the Binder Bee. Come on down for the show, it's always a good time. July...
My 800B came with 1/2" spacers on the pass side.
Did you put the 1/2" spacers back in on the passenger side springs?
Depends on what you call crazy expensive.
Jeff at IH Only North sells these that that just need to be covered.
There is a IHSTO meeting this Thursday evening in salem @ Elmers.
Hope to see you there. More info on the IHSTO.org site.
Welcome to the board. There are a few good right ups on lifts for 69-75 trucks. I don't think there is an off the shelf lift for them yet.
to change a scout II front axle from a sua to a soa is a royal pain ( welding and grinding on cast) and you still half to do a cut and turn. The...
Whats your budget and experience. To fit 35-37 tire you are looking at doing a soa, in which case change out the front with a chevy dana 44 and...
Jeff at IH only north is working on putting some together. An email note from him:
We are working on some very exciting, long over due...
here is a link to the one I did. 67 T-ette
This is the right pump
The stock fuel pump for the 800B v-8 was the vacuum pump one.
Only way to fix the pinion angle is to do a cut and turn on your axle. Using 4 degree shims will help the caster but makes the pinion angle even...
I have remove them with both the doors on and off. I will agree with scoutboy that it is easier with out them on. If you need a set PM me , I have...
Working on getting the MR Scout web site overhauled soon (this winter). Stay tuned
The good place to post this would be the general IH tech forum. Mike is rarely online to check this forum.
Have you found your inner fenders yet. Just talked to Mike @ MR SCOUT and he has some.
Here is a link strait to it.