Separate names with a comma.
There where travelalls with the hood painted that way,very rare and for the life of me I cant remember what they where called.John Glancy and my...
Yes just like that.
Napa has a Kit,I beleive it was for gms
If not find a paddle drill bit(flat for wood) grind the point off
It might leak there,dont know how well it will seal to the liner,its made for flat surfaces.Worst case,they make silic.one to seal it with
Those hubcaps might be worth more than the tractor.
They are factory and have 4 tabs that need popped inward.
You mean they didnt have the parts book there with it.
This is why we all come here,to learn from other people so we dont make the same mistakes.I work on alot of boiler/hot water heating systems.Seen...
I have taken the rag joints apart and put new center in,they make kits for it.
Talk to John G he has some parts floating around,might have a sending unit.
I had an old mig,finaly broke,it would be about $300 to fix.My wife told me to just buy a new one,bought a miller (dont remember the number right...
I would do option C,look for a good used IH motor.They are out there,even look in junk yards in old school busses
Yes they do,I have one mounted on my travelall with hose in a loop,so if my mechanical goes bad,I can splice in and get home.
Sounds like either a dirty battery cable at the starter end,or a bad solinoid on the starter.
I would wire an electric fuel pump up and drive it some.This should help trouble shoot some.I dont like using electric eor long though.
Yes Matthew I believe you are correct as my spare rad support from a 74 has those style that press into the rad support.
I would put a third valve in between the 2 tees,if not when you do open the 2 valves when you do need heat,it might not flow through the heater...
I have a 2019 f250 crewcab4x4 diesel,I can tow I believe 16000 pound gooseneck with just me in the truck,put 3 people in and that drops to...
Yes something like that might work,but what kind of foam that will melt down in that area.If I ever have time Iam going to experiment as I have...