Separate names with a comma.
Another IH guy basically said he had a 727 and didn’t know what he was looking at.
Mike at IHO thought it could have been special ordered behind an AMC 401, but wouldn’t have been behind a 345.
I ran across someone (friend of a friend) who says he had a 79 Scout II with a Turbo 400 behind a 345 from the factory, and it was on the LST....
Awesome! Still doing its job.
Pull the cover off, and visually inspect the gears.
PTO can drive a winch, or hydraulic pump for a dump bed. Other uses as well.
Okay, then it’s a T98.
FYI: The factory used T98 top covers on early T18s, for a long time. A lot of people have only looked at the top and...
It’s probably not a T98, but a T18. Go by the numbers on the side, not the top cover.
Top cover - yes.
Side of the case - no. At least in my experience, I’ve worked on many.
I ordered a transmission off eBay, from a wrecking...
I don’t see any mounting ears on it, to bolt to the bell housing. IH is the only one I know of that mounted with studs in the front surface of the...
I lifted my C Series, but I did it mostly custom, and it’s a 4WD. The only thing still IH (kinda) are the rear springs. They’re 3” lift springs...
Did you try the one I referred you to?
^This, my 71 Travelall was the same stock.
On my 71 Travelall the shifter rubs the air conditioner vent box.
That looks like the ones from a Loadstar, and it had a parking brake on it.
Here’s the one currently in my Travelall. Edit: I changed the shifter...
I have a similar bumper from a C series pickup.
It’s best to have it all in one place, you’re welcome to put it here.