Separate names with a comma.
I don't see how this rubbing loud sound is normal or acceptable considering the original t90 I have sitting never made that sound
It makes it when in 2nd resting or riding the shifter.
Shift from 1 to 2, yes
Down shift from 3 to 2, yes
Normal driving, no
That's what I was thinking only because I came across a topic on subtle differences in the t90.
I had the tower rebuilt by Novak but that was for...
It happened the first time I backed out of the driveway and drove it 20 feet.
The sound was instant from the first time I put in second gear
62’ Scout 80
dana 18 (no mods)
So I purchased this rebuilt t90 from someone out there that is known for rebuilding these...
Ok than you
Would the Bell housing basically float of the block prior to installing the bolts if done correctly?
Do I tap the dowels into the...
Have pics of location?
Found them online but I don't remember dealing with them during rebuild. I changed the rear freeze plug behind the...
62 Scout 80 4 cyl 152
From 3rd to 2nd what speed would be the max to transition smoothly?
Tore down the trans 3 times already because of...
Msd ignition.. auto correct
My problem is it can't handle the heat
Scout 80 152 1962
Have had the mad ignition in for a while, ran good. Noticed it started to bog down. Under cap shows some melting.
This is as tight as I could get
Rear synchros spins freely back and forth while staying slotted. Front however will not move. Think it will free up once I am able to get the top...
Where do I find these shims, are they called shims for a trans or gonby another name?
Thank you for the help on this
Anyone rebuild tops? The...
This spacer was in the used parts box from the rebuild.
18. Spacer, mainshaft to rear bearing
On the Novak diagram
I have a rubber piece that has...
I can not move the main shaft at all front to back
Thank you for the well written response
I'm almost certain I have the snap ring on. Since Rick's video was taken off YouTube I found a young...
3 speed 62 scout 80 slant 4 with Dana 18
Original loader failed
New loader failed
All components for the rebuild were new
Wouldn't come out of third after driving steady for mile or so
New top which has new forks
Checked play for the transfer case with adding shims to...
Recently rebuilt transfer case and transmission. Everything was moving and shifting properly before top was on.
Test drive was great.