Separate names with a comma.
Great drill press speed chart here;
Rifle drilling a 1" long steel bolt is equivalent to...
This info may not be of use to you Doc since you are using a hydraulic unit, but it may help someone else searching for this topic and finding...
I know this thread was about Scout cyls, but FYI for anyone searching for pickup/Travelall clutch slave cylinders since they were mentioned here,...
I think its a great idea too Mike. :yes:
Erik may have a point. Maybe if you called them GearHeds, leaving off the "A" might make a difference...
I did pour a small slab for it, but my 60 gal Lowes vert compressor putts along happily under a small roof behind my garage, still bolted to the...
Sorry to hear that you toasted your trans Rob.
Some lift would go a long way too. After you run the vents, the lift would keep your feet dry....
Here is one way that it was done on a ford.
The BP IH Knowledge base has the lowdown on electrolytic rust removal, thanks to MUDDAWG....
For future reference and anyone else searching, here is what I have gathered from the web for a Scout 80. Source?
If any of these parts are...
Hopefully Bill has the parts you need.
The last time I asked about 66 1000 front suspension parts at The Scout Connection, they sent this...
We were all new here once. :D
Welcome to the BP.
The forum you posted this in is for site questions and info.
Moved to Gen IH Tech.
Did somebody say IH SV sheet metal tunnel ram manifold? :D
Making your own intake manifold is an art and a science, as well as requiring some...
Please place your ad in the classifieds.
Did somebody say "semi-RV"?
I was always partial to the Kingsley Conversions.
To keep it all IH;
A class 8...
Just providing a link for any future searches. This question was also asked, and answered, here;...
You are both right about glare on the hood, especially on a white Scout. :D
But, at least we dont have to worry about canyons down here. :)
Bummer. It was hard for me to find a 392 even semi-locally. I got mine from ATL GA, luckily the seller agreed to meet me half way, in Montgomery...
I made my own, years ago, out of angle and flat bar.
IH SV (304, 345, 392) engine ID pad on side of block;