Separate names with a comma.
Have a set of old tappets wrenches and the holders that hold the tappet from turning for flathead engines. came in real handy when we rebuilt a 9N...
Run Delo 15w-40 in mine use the same oil in my diesel truck, get it in gallon jugs.
I have had two clutch friction discs fail, first one the spring popped out and wedged against a flywheel bolt, second one it was just rattling...
I have a 2001 Duramax that is filling my crankcase with fuel. I had it checked out and comp was great leak down test was fine and he said they...
BCB makes them also about $90 for all three.
Take one of the old leaky ones to the parts house or if you have a lift you can get braided SS one made how ever long you need. I used 6 longer...
Banjo bolts use two washers one between the fitting and the caliper and one under the bolt.
NAPA has a tester to check for combustion gases in the radiator. Used and not bought a few trucks because of it.
Binder books for manuals, they aren't inexpensive but they are factory reprints.
Large Washington State
Last one we had done was 600+ the ring and pinion
Put the rubber ones on my 72 Chevy and they worked great
Why not go buy a gasket scraper
Had 3.73 in my 90,97,01 chevy trucks and have 3.73's in my Scout
MY 350 Chev was sitting in the yard with no keys in it and all of a sudden it took off cranking, I never did figure out why and that was 30 years...
I have 4' lift springs and 6* castor shims 5 " shackles from BCB all went together well and the Scout II drives great.
That looks like a abortion.
Might check the freeplay and the release bearing.